Ratchet Belts - The Belt with No Holes | Nexbelt

How to Fit a Kid's Golf Ratchet Belt Properly

How to Fit a Kid's Golf Ratchet Belt Properly

By Ratchet Belts - The Belt with No Holes | Nexbelt | Published: 2026-10-27

Category: How-to Guides

Learn how to properly fit a kid's golf ratchet belt for comfort and adjustability. Step-by-step instructions for Nexbelt's PreciseFit system.

Quick answer

To fit a kid's golf ratchet belt properly, slide the strap through the buckle, adjust to the desired tightness, and lock the ratchet mechanism. For growing kids, leave a little extra strap length.

Why a proper fit matters for kids

A correctly fitted golf belt helps kids focus on their game without constant adjustments. Ratchet belts offer micro-adjustability that traditional hole belts lack, but improper setup can lead to discomfort or the belt loosening during play.

Choosing the right strap length

Nexbelt's kid's belts fit up to a 35" waist. For a child with a smaller waist, you'll need to cut the strap to size. Always measure your child's waist first and leave 2-3 inches of extra strap for growth. The braided straps (e.g., Kid's Braided Charcoal) are vegan-friendly and stretch slightly, so account for that when cutting.

Steps to fit a kid's golf ratchet belt

  1. Measure the child's waist: Use a soft measuring tape around the natural waistline (where the belt will sit). Add 2-3 inches for growth. This determines where to cut the strap. Write down the measurement before cutting.
  2. Cut the strap to size: Remove the buckle from the strap. Use sharp scissors to cut the strap at the measured point. For braided straps like the Kid's Braided Charcoal, cut between the weave to prevent fraying. Cut conservatively—you can always trim more, but you can't add back.
  3. Insert the strap into the buckle: Feed the cut end through the buckle's slot until it stops. Ensure the strap is oriented correctly (the buckle's release lever should face outward). Check that the strap is not twisted before locking.
  4. Adjust the fit with the ratchet mechanism: Pull the strap tight to the desired snugness. The ratchet will click into place. To loosen, press the release lever and slide the strap out slightly. For a child, aim for a fit that allows one finger to slide between belt and waist. Test the fit by having the child bend and swing—if it digs in, loosen one click.
  5. Check for growth room: If the belt is at its tightest setting and still loose, you may need to cut the strap shorter. If it's at the loosest setting and tight, leave extra strap for growth. The PreciseFit system allows fine adjustments without tools. Recheck the fit every few months as the child grows.

Product facts

  • Kid's Grey Golf Ratchet Belt 1.125" [29mm]: The Kid's Grey Golf Ratchet Belt features a PreciseFit™ mechanism and fits up to a 35" waist. The strap is 1 1/8" wide and made of vegan-friendly material. The narrower strap is proportioned for a child's frame, and the PreciseFit system allows micro-adjustments for a custom fit without holes.
    Kid's Grey Golf Ratchet Belt 1.125" [29mm]
    Kid's Grey Golf Ratchet Belt 1.125" [29mm]

Shop Related Products

Kid's Grey Golf Ratchet Belt 1.125" [29mm]

Kid's Grey Golf Ratchet Belt 1.125" [29mm]

$26.39 $39.99

Shop Now