What This Guide Covers
If you've picked up a Nexbelt Brass Dual Release Duty Buckle and a compatible 2.25" duty belt strap, the next step is putting them together. This guide walks through the assembly process using only what the catalog confirms, so you can get your duty belt set up with confidence.
The buckle is engineered for professionals who need a secure, controlled release. It uses a dual push-button system designed to prevent accidental disengagement under pressure. The strap is sold separately, and compatibility is key.
What the Catalog Confirms About the Buckle
- Nexbelt Brass Dual Release Duty Buckle – For 2.25” Duty Belt Strap: Compatible with Nexbelt 2.25” duty belt straps This tells you the exact strap width required. Using any other width may not fit or lock correctly.

Nexbelt Brass Dual Release Duty Buckle – For 2.25” Duty Belt Strap - Nexbelt Brass Dual Release Duty Buckle – For 2.25” Duty Belt Strap: Dual push-button release system for enhanced retention and security Both buttons must be pressed simultaneously to release, which prevents the buckle from opening accidentally during duty.
- Nexbelt Brass Dual Release Duty Buckle – For 2.25” Duty Belt Strap: Heavy-duty brass construction The brass finish adds durability for daily carry in law enforcement and tactical environments.
- Nexbelt Brass Dual Release Duty Buckle – For 2.25” Duty Belt Strap: Secure lockup with fast, controlled release Once assembled, the buckle should hold firmly but release quickly when both buttons are pressed—no tools needed.
Assembling the Buckle and Strap
The following steps are based on the supplied product evidence. The catalog does not include full step-by-step instructions, so these are logical assembly steps inferred from the buckle's design and compatibility.
- Confirm compatibility: The buckle is designed for Nexbelt 2.25” duty belt straps. Check that your strap is exactly that width and from Nexbelt to ensure proper fit.
- Thread the strap through the buckle: Insert the tail of the strap through the buckle's belt loop. The buckle likely has a fixed bar or a retention mechanism that holds the strap in place. Make sure the strap is oriented so that the buckle's release buttons face outward.
- Position the buckle at your desired location: Slide the buckle along the strap to where it feels comfortable on your waist. The strap is cut to fit, so you may need to trim it to your size before final assembly. The catalog confirms 'Cut To Fit' for the strap.
- Secure the strap end: If your strap has a retention system (e.g., a keeper or hook), engage it to prevent the strap from slipping. The catalog does not specify the exact mechanism, so follow the strap's own instructions if available.
- Test the release: Press both buttons simultaneously to check that the buckle opens cleanly. The catalog states '100% Secured' and 'Secure lockup with fast, controlled release'. If the buckle feels loose or doesn't release smoothly, re-check the strap threading.
What the Catalog Does Not Confirm
The catalog does not include detailed step-by-step assembly instructions, torque values, or recommended strap length measurements. It also does not specify whether the buckle uses a screw-in or snap-in retention system. For exact assembly details, refer to any documentation that came with your strap or contact Nexbelt support.
The buckle is available only in a brass finish. No other color options are listed in the catalog.

