Start with the two parts you actually need
A reliable EDC belt starts with the right strap and buckle combination. The Supreme Coyote EDC Strap and the Supreme Black EDC Buckle are designed to work together, but only if you match the width correctly. This guide walks you through confirming compatibility, threading the strap, and adjusting the fit so your belt performs as intended.
Before you begin, check that you have both the strap and the buckle. The strap listing is for the strap only, and the buckle listing is for the buckle only—so you'll need both to complete your setup.
Key specs that determine compatibility
- Supreme Coyote EDC Strap 1.50" [38mm]: Strap width is 1 1/2" (38mm). This is the critical measurement for matching the buckle.
![Supreme Coyote EDC Strap 1.50" [38mm]](/uploads/sites/2069/import-1786242918374-515604191.jpg)
Supreme Coyote EDC Strap 1.50" [38mm] - Supreme Black EDC Buckle, Fits 1.50" [38mm] Strap: This buckle will only work with a 1.5" strap. WILL NOT FIT STRAPS THAT ARE 1.38". Confirms the buckle is sized for 38mm straps and warns against narrower straps.
![Supreme Black EDC Buckle, Fits 1.50" [38mm] Strap](/uploads/sites/2069/import-1786242858545-730491467.jpg)
Supreme Black EDC Buckle, Fits 1.50" [38mm] Strap
Confirm your strap and buckle are a match
The Supreme Coyote EDC Strap is 1 1/2" wide, which is equivalent to 38mm. The Supreme Black EDC Buckle is explicitly designed for 1.5" straps and will not fit 1.38" straps. So if you have the Coyote strap, you're good to go with this buckle. If you have a narrower strap, you'll need a different buckle.
Also note that the buckle uses three set screws for a reliable hold, constructed from stainless steel rather than pins. This design is patent pending.
How to thread and secure the strap
- Step 1: Insert the strap into the buckle: Feed the end of the Coyote strap into the buckle's strap slot. The strap should slide in smoothly—if it doesn't, double-check that you have the 1.5" version.
- Step 2: Tighten the set screws: Use the three stainless steel set screws to secure the strap in place. Tighten them evenly to ensure a reliable hold. Do not overtighten, as this could damage the strap.
- Step 3: Test the release mechanism: The buckle features a push-button trigger for easy release. Press the trigger to confirm it moves freely and securely holds the strap when released.
Adjusting the fit for everyday carry
The Supreme Coyote EDC Strap is designed to fit up to a 50" waist, according to the catalog. Once threaded, you can adjust the strap by pulling it through the buckle to your desired tightness. The ratchet mechanism (if applicable) or set screws will hold it in place.
Because the strap is made from a microfiber composite with high-density polyester fibers, it offers a balance of stiffness and flexibility. The sweat-resistant backing helps keep you comfortable during daily wear.
Material and care notes
- Supreme Coyote EDC Strap 1.50" [38mm]: The strap is made from an advanced composite of microfibers with ultra-fine polyester fibers, providing just the right amount of stiffness. The backing is sweat-resistant. This material choice affects how the strap feels and performs over time.
- Supreme Black EDC Buckle, Fits 1.50" [38mm] Strap: The buckle is powder-coated in Granite Black for increased wear resistance. The coating helps the buckle withstand daily use.
What to check before you head out
After setup, give your belt a quick once-over: ensure the set screws are snug, the strap is not twisted, and the push-button releases smoothly. The Coyote color is a tan variant, so it pairs well with earth tones and tactical gear.
Remember, the catalog does not provide specific care instructions beyond the sweat-resistant backing, so avoid harsh chemicals and clean with a damp cloth as needed.

![Supreme Coyote EDC Strap 1.50" [38mm]](https://nexbeltren.com/api/image-optimizer?src=%2Fuploads%2Fsites%2F2069%2Fimport-1786242918374-515604191.jpg&w=800&q=86)
![Supreme Black EDC Buckle, Fits 1.50" [38mm] Strap](https://nexbeltren.com/api/image-optimizer?src=%2Fuploads%2Fsites%2F2069%2Fimport-1786242858545-730491467.jpg&w=800&q=86)